DJI Power 1000 V2 Portable Power Station

– USB devices
– AC devices
– DJI drones
– Solar panels

Please note: Solar panels require the DJI Power Solar Panel Adapter Module (MPPT) and solar panels, which are sold separately. Solar panels from DJI-certified brand Zignes are recommended. To use solar panels not officially recommended by DJI, convert the solar panel connector to an XT60 interface. To prevent damage to the MPPT module and the power station, ensure the open-circuit voltage of each solar panel is less than 30 V. The power output of each solar panel connected to an XT60 should not exceed 200 W, with the total output of all panels capped at 400 W.

– AC Output × 2
– AC Input × 1
– USB Type-C × 2
– USB Type-A × 2
– SDC × 1
– SDC Lite × 1

– Vented
– Portable
– Firmware upgradable
– 11 temperature sensors
– 2 x 1/4″ thread
– Ventilated side panels
– 10 x fuses
– Built-in bypass switch
– UPS mode
– Protection: Short-circuit / Over voltage / Overcharge / Overheat / Flame retardant
– Integrated battery management system (BMS)
– 4000 max recharge cycles

– AC Output × 2 (AC 100-120 V: 1440 W / AC 220-240 V: 2200 W / 2600 W 60-second burst / 4400 W peak)
– AC Input × 1 (1200 W recharging)
– USB Type-C × 2 (140 W per port)
– USB Type-A × 2 (24 W max per port)
– SDC × 1 (240 W output / 400 W input)
– SDC Lite × 1 (240 W output / 400 W input)
– Solar power (800 W max input)

Yes

Black

DJI Power 1000 Portable Power Station (CP.DY.00000055.02)

13 kg

5 years

230 x 448 x 225 mm (H x W x D)